Axis P3364-LVE Guide D'installation page 20

AXIS P3364-LVE Network Camera
If a cable other than the provided cable is used, you need to prepare a network cable with a gasket.
Gently push the cable through the gasket provided and attach a network connector. It may be
necessary to pierce a hole in the gasket with the resistorx L-key.
Route the Cables
The cables can be routed in the following ways:
• Through the wall, see Route the Cables through the Wall on page 21
• Along the wall, see Prepare the Unit Casing on page 21 and page Route the Cables along
the Wall on page 22.
1
Mounting bracket
2
Network cable with gasket
3
Unit casing
4
Wall gasket
5
Bottom gasket
6
Spring
20