Operation - DS Produkte BC-01 Mode D'emploi

1 Housing
2 Door
3 Grip
4 On / Off switch with operating lamp
5 Drip tray
6 Cover of the drip tray
7 Release lever for door

Operation

PLEASE NOTE!
■ Always set up the device with a clear space on all sides (at least 20 cm) and clear
space above it (at least 30 cm) on a dry, fl at, solid and moisture-resistant surface.
■ The surfaces of furniture may possibly contain elements which can attack and soften
the adjustable feet of the device. If necessary, place a suitable pad below the adjust-
able feet.
For the best possible result, cool the beer keg in the fridge fi rst before inserting it
into the device.
1. Clean the device before you fi rst use it (see the "Cleaning and Storage" chapter).
2. Fully unwind the mains cable.
3. Set up the device in a suitable location, following the safety instructions and the notes
provided at the beginning of this chapter.
5. Insert the mains plug into a properly installed socket that is easily accessible.
6. Pull on the release lever for the door (7) to open the door (2).
7. Pull out the tap on the beer keg. Follow the manufacturer's instructions on the beer
keg to do this.
10. Move the On / Off switch (4) to position I to switch on the device. The operating lamp
in the On / Off button lights up and the beer keg is cooled.
15
Not shown:
•
•
•
•
4. Hook the drip tray (5) with cover (6) into the locking lugs
on the device.
8. Place the beer keg in the device in such a way that the tap
is pointing forwards.
9. Close the door. When you do this, make sure that the tap
is guided through the opening in the door. You must hear
and feel the door engage.
Mains cable and plug
Recess for mains cable (on the back)
Ventilation slots (on the back)
Operating instructions
EN