IOTA ONE Guide De L'utilisateur page 9

INITIAL SET-UP
Inserting a MicroSD Card (sold separately*)
1. Align the MicroSD Card so that the pins are pointed toward
the card slot;
2. Push the MicroSD Card into the card slot until it locks
into place.
Removing a MicroSD Card
Caution: Removing the MicroSD Card while it is in use may
cause data loss or result in application errors. (Ensure all data
is saved to the MicroSD Card before removing.)
1. Select the Tray button in the notification area, in the lower-
right corner of the screen;
2. Select Safely Remove Hardware;
3. Select Eject XXXX SD Card. A message will appear
confirming that the MicroSD Card can be safely removed. If
a warning message appears stating that the MicroSD Card
cannot be removed, ensure all data transfers involving the
MicroSD Card are complete;
4. Press down the MicroSD Card to release it;
5. Slide the card out after it ejects from the MicroSD Card slot.
* MicroSD card sold separately. Use only compatible memory
cards. Incompatible memory cards may damage to the
iOTA ONE and corrupt the data stored on the card.
9