Device Life; Legal Obligations - KONG Italy CEVEDALE MONO Mode D'emploi

5 DEVICE LIFE

Read point 1C very carefully. The life of
metal devices is theoretically unlimited,
while textile and plastic devices can last 10
years from the date of production as long
as: maintenance and storage are carried out
as described in point 3, the results of pre-

6 LEGAL OBLIGATIONS

Professional and
are often regulated by specific national
laws that may impose specific limits and/
or requirements for the use of PPE and
the preparation of safety systems, which
7 WARRANTY
The manufacturer guarantees that the device
complies with regulations in force at the time
of production. The guarantee covering faults
is limited to production defects and raw
materials. It does not include wear and tear,
oxidation, damages caused by improper
use and/or during competition, incorrect
maintenance, transport,
storage, etc. The guarantee becomes
void as soon as the device is modified or
tampered with. The validity corresponds to
the legal guarantee of the country where
8
recreational activities
conservation,
use, post-use and periodic inspections are
all positive, and the device is used correctly,
not exceeding 1/4 of the indicated load.
Discard any devices that do not pass the
pre-use, post-use and periodic inspections.
included the PPE in their components. The
user is obliged to know and apply these
laws, which may in some cases impose
obligations different from those contained in
this information.
the device was sold by the manufacturer,
with effect from the date of sale. After this
period no claim can be made against the
manufacturer. Any request for repair or
replacement under this warranty must be
accompanied by a proof of purchase. If the
defect is accepted, the manufacturer, at its
sole discretion, will repair, replace or refund
the device. Under no circumstances does
the manufacturer's liability extend beyond
the invoice price of the device.