Using The Product; Pause Or Cancel Grinding; Manual Grind - Cuisinart DBM18E Instructions

C. USING THE PRODUCT
1 . Remove the lid from the bean hopper .
2 . Fill this hopper ensuring that the lid can close
securely without forcing . The maximum capacity
is 250 g . Nevertheless, make sure you add enough
beans to obtain the desired amount of coffee .
3 . Plug the lead into the mains .
4 . Select the grind setting by turning the hopper to the
desired setting . The higher the number, the coarser
the grind . Use 1-6 for espresso, 7-12 for a classic filter
coffee machine and 13-18 for a French press . Your
selection will be displayed on the LCD screen .
5 . Select the cup setting: Press the cup selector
repeatedly until the desired number appears on
the LCD screen . You can choose between 1 and 14
cups. Keep the button pressed to scroll through the
numbers more quickly .
6 . Press the "Start/Stop" button to start grinding .
Notes:
• A safety locking system prevents the appliance from
starting when the hopper and grind chamber are not
properly secured .
• If the grind chamber is too full, the grind might block
the chute . If this is the case, the unit will not work and
the LCD screen will flash . To clear the chute, clean it
using a brush specifically designed for this purpose .
• If the grinder stops during a cycle and " HHH " appears
on the LCD screen, it is likely that the motor has
overheated . Allow the unit to cool for 30 minutes .
Check that " HHH " is no longer displayed on the LCD
screen and start the unit again .
7 . The grinder will stop automatically when the amount
of coffee beans selected is ground .
8 . Pull the grind chamber toward you to remove from
the unit .
D. PAUSE OR CANCEL GRINDING
a . To pause the grinding, press " Start/Stop " . The grinder
will stop and the countdown timer will start to flash .
Press " Start/Stop " again to resume .
Note: The unit will stay in pause for up to 5 minutes
before cancelling the grind .
b . To cancel the grind, hold " Start/Stop " for 2 to 3
seconds .
E. MANUAL GRIND
After selecting your grind setting, you can also opt to
control how much coffee the unit will grind . To do so,
follow steps 1 to 4 in section 3C, then press and hold
the manual button until the desired amount of coffee
has been ground . The LCD screen will display " M " .
NOTE: To prevent overflow when using the manual
feature, the grinder will automatically stop grinding
when the maximum capacity has been reached .
13