Rohr DFC-10P Mode D'emploi page 9

5. On / off switch
6. 12 Volt positive terminal
7. 24 Volt positive terminal
8. Negative terminal
9. Fuse housing
1. LCD Ammeter - displays current / load
2. Power indicator light
3. Operation dial - turn left for jump start function and turn right for charging
currents 4. Timer - used to control charging duration, must be used when
operation dial is at 4, 5 or 6. 5. 12 Volt positive terminal
6. 24 Volt positive terminal
7. Negative terminal
8. Fuse housing
DFC-10P / DFC-30P / DFC-50P /
DFC-450P / DFC-650P
DECLARATION
Fig.4 - Panel Controls for the DFC-650P
OF
CE
CONFORMITY
English
© ROHR 7