Palona Tuner 190C Mode D'emploi page 66

Tuner 190C
5.7 FM
FM radio mode receives analogue radio from the FM band and displays
RDS (Radio Data System) information about the station and where
broadcast.
To find a station, press . The frequency display starts to run up as
Tuner 190C scans the FM band. Alternatively, you can scan up or down by
pressing and holding the buttons or on the remote control
with quick presses, or by turning the navigate reel on the device.
5.7.1 Preset
To store an FM radio preset, press and hold on the remote control or
FAV on the device until the display shows the Save preset screen. Select
one of the 10 presets to save the current station.
To select a preset, press on the remote control or FAV on the device
briefly, then select one of the listed preset stations. The screen will show
n ( 1, 2 etc) at the bottom right.
You can store/recall up to 10 of your favourite stations to the memory. This
will enable you to recall your favourite stations 1- 10 quickly and easily by
pressing the number buttons on the remote control. To store your favourite
stations 1-10 by pressing and hold the number buttons on the remote
control.
5.7.2 Now playing information
While the stream is playing, the screen shows its frequency, or if RDS
information is available, station name and any further RDS information
such as programme name, track title and contact details. If no information
is available, just the frequency is shown. Stereo broadcasts are indicated
with an icon at the top of the screen, To view further information about the
broadcast, press MENU/INFO on the device or INFO on the remote control.
Each time you press MENU/INFO on the device or INFO on the remote
control, another set of information is displayed, cycling through RDS text,
further RDS text (station/programme type), frequency and today's date.
EN - 25