Télécharger Imprimer la page

Westwood Design FOUNDRY Instructions D'assemblage page 6

Publicité

- After completing assembly, check that all bolts and screws are secure and tight. Hardware
can become loose over time, so it is your responsibility to periodically check the tightness
of all fasteners for as long as you use the crib.
- Wood is a natural material. As such, it can be affected by changes in temperature and
humidity. Extreme changes in humidity and temperature can cause the wood to warp, swell,
crack, or shrink, thus compromising the structural integrity of the crib and making it
dangerous to use.
- Use caution when placing the crib in storage to avoid extremes in temperature or
humidity. Cribs should always be stored indoors in climate controlled, dry locations.
- Use care when using a vaporizer or humidifier around the crib. Do not aim the vapor at
the crib or any other wooden furniture in the nursery. Avoid using vaporizers or humidifiers
for extended periods of time.
- To clean the crib, wipe with a damp cloth and immediately the dry the surface. Do not use
any chemical cleaners or polishes. Such products can leave a residue on the finish and
come in contact with your child.
- Your crib has a durable and protective non-toxic finish. However, if you decide to refinish
it, you must use a non-toxic finish specified for children's products. Do not use any toxic
stripping methods to remove the old finish.
635 N. Billy Mitchell Rd., Ste. B
Salt Lake City, UT 84116
Phone: 908-719-4707
CARE AND MAINTENANCE
westwood design
www.westwoodbaby.com
13-3120 Rutherford Rd., Ste. 407
Vaughan, ON L4K OB2
Canada

Publicité

loading