Télécharger Imprimer la page

BRKT Brand RACK ER12W Manuel D'instructions

Publicité

Liens rapides

RACK ER12W
RACK ER18
RACK ER27
RACK ER35
RACK ER42
12, 18, 27, 35, & 42 Space Rack Enclosures
INSTRUCTION MANUAL
MANUAL DE INSTRUCCIONES
MANUEL D'INSTRUCTIONS
CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT
CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE
MAY OCCUR!
Max Weight: 12 Space Rack - 135lbs
18 Space Rack - 500lbs
27 Space Rack - 750lbs
35 Space Rack - 900lbs
42 Space Rack - 1100lbs
V1
V3
P1

Publicité

loading

Sommaire des Matières pour BRKT Brand RACK ER12W

  • Page 1 RACK ER12W RACK ER18 RACK ER27 RACK ER35 RACK ER42 12, 18, 27, 35, & 42 Space Rack Enclosures INSTRUCTION MANUAL MANUAL DE INSTRUCCIONES MANUEL D’INSTRUCTIONS CAUTION: DO NOT EXCEED MAXIMUM LISTED WEIGHT CAPACITY. SERIOUS INJURY OR PROPERTY DAMAGE MAY OCCUR!
  • Page 2 DISCLAIMER – WARNING INFORMATION Disclaimer – RACK BRAND has extended every effort to ensure to accuracy and completeness of this manual. However, RACK BRAND does not claim that the information covers all installation and or operational variables. The information contained in this document is subject to change without notice or obligation of any kind. Regarding the information contained herein, RACK BRAND makes no representation of warranty, expressed or implied, and assumes no responsibility for accuracy, sufficiency, or completeness of the information contained in this document.
  • Page 3 PRODUCT COMPONENT PARTS 10-32 Cage Lag Bolt Anchor Screw Rack Spacing Part Letter 12 Space 18 Space 27 Space 35 Space 42 Space Product Components Front Door Side Panels Fan Panel * Castors Adjustable Feet 2U Blank 2U Shelf 5U Shelf 10-32 Shelf Screws Keys Lag Bolts...
  • Page 4 OPEN / LOCK DOOR Pull handle and rotate to open door. Push handle to flush position to lock door with included key. REMOVABLE/ LOCKABLE SIDE PANELS Side panels are removable and include locks for improved security. Note - included keys used to lock/ unlock front doors and side panels.
  • Page 5 ADJUSTABLE SHELVES Adjust Shelves to desired location Adjuse los estantes a la ubicación deseada Réglez les tablettes À la position dèsiree Shelves and blanks can be relocated within the rack enclosure rails. Rail attachments include spacing numbers for proper alignment. (note- heavy components should always be placed at the bottom of rack enclosure) Note: 12W rack uses cage nuts and 10-32 screws...
  • Page 6 (note- door will need to be rotated 180 degrees (flipped) to switch door orientation) WALL MOUNTING – RACK ER12W ONLY Mount RACK ER12W to wall using wall hinge. Wood Stud Installation: 1. Drill 7/32” pilot holes, 2.75” deep 2.
  • Page 7 VENTILATION FOR COMPONENTS Additional ventilation for bottom components Ventilación adicional para los componentes de fondo Ventiation supplémentaire pour les composants bas Do not obstruct the perforated hexagonal holes located at Edge of base. These holes aid in ventilation. ADDITIONAL VENTILATION FOR COMPONENTS/ WIRING On bottom of base 3 panels can be removed in center when additional ventilation is needed.
  • Page 8 RACK BRAND de los defectos de materiales y de mano de obra por un periodo de 5 años. RACK BRAND, a su exclusivo criterio, reparará o reemplazará el producto o componente defectuoso. En caso de que no se sigan las instrucciones de BRKT BRAND para el cuidado del producto la garantía quedará anulada.

Ce manuel est également adapté pour:

Rack er18Rack er27Rack er35Rack er42