Publicité
Les langues disponibles
Les langues disponibles
DESCRIPTION
VGA 404 is a video 4X4 patch. It allows to select one VGA source (from 4) and to send it to one of
the 4 outputs: so each output is connected to one input, and the same input can be send to several
outputs at the same time. All the arrangements can be remote controlled.
The pulse mode, using a fugitive remote control, selects an input and route it to the desired
output.
Continuous mode :
- Closed loop : select the desired connection.
- Open loop : a default setting is used (user defined).
RS232 mode.
The front panel keyboard allows the user to define its own settings and to save them, thus
allowing later recall.
VGA 404 has 4 user memories in a "total recall" scheme: the setting is selected using the front
panel keyboard, or automatically after power cut (last in use).
USES
Composite video signal distribution, S-vidéo (Y/C), RVB.
Video signal amplification
Handing of different video signals at the same time.
ENGLISH
12
Rami - VGA 404
Publicité
