Publicité
FINAL ASSEMBLY
4. Connect the electrical connector from the light to the electrical low voltage wire connector coming out of the electrical enclosure.
5. Align and insert the buttons on the back of the light into the upper and lower adjustable button receivers [205-3304].
6. Slide the light down until it's completely engaged.
3
4
© 2020 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Surface Mount
Button
[211-1351]
Recess Mount
15
Part no. 209-1330 01/06/21
Vesper Edgeline Lights
Publicité
Chapitres
