Bartscher TARGHETTA CE Mode D'emploi page 9

TAVOLI REFRIGERATI - PIZZERIA
ENG
5.1 POSITIONING
The installer must verify the presence of fire prevention regulations, and place the
appliance in full obedience of the industrial injuries legislation and the current
regulations.
The appliance works with an air condenser, so it is necessary to pay attention to
the placing of it, keeping free the side of the incoming of the cooling air.
Besides, it is also necessary to keep it at least at 20 cm from wall or other
appliances nearby the air exit, so as to obtain the best performances.
To refrain from placing the appliance in closed or poorly aired spaces, from
exposing it directly to sun-beams, and from the heat sources.
5.2 AMBIENT
Generally, the refrigerators with air condensing units work with a maximum
ambient temperature of 32°C. The declared performances are not guaranteed
where there are higher temperatures.
The producing company guarantees an IP43 degree of protection (in accordance
with CEI 70-1 EN 60529 and IEC529 laws). The installer will estimate if different
ambient conditions require other kind of protection degrees.
NOTE
Correct installation:
- Verify the electrical connections
- Verify the absorption at working appliance
- Complete at least one chilling or freezing working cycle
If the appliance has been transported in a non-appropriate way (i.g. non-vertical
position or laying on the back), wait at least 4 hour before switching it on.
The end user must be informed on the right use of the appliance.
10
Ed.06/2011