Publicité
ENG
User Manual
Product information
1. Pusher
2. Transparent cover for feeding port
3. Fruit filter
4. Filter holder
5. Handle
6. Fruit pulp container
7. Main unit
8. Juice jug
Usage
• The machine starts with a running-in phase. On first use
there may be peculiar smoke smell and spark. This is normal,
after the motor has worked for a short period, the above
phenomenon will disappear.
• During processing, check if jug or residue cup is full. If it is
full, please turn off power supply, clean up, then use again.
• In order to prolong service life of this machine, there is an
over-temperature protective device mounted in the motor. If the
motor works over a long time or it becomes overloaded, power
supply will automatically turn off. After the motor has stopped,
pull out the power plug from the mains power supply. Then
wait for the motor to have cooled down to use it again. (It takes
about 30 min.)
• This machine has a safety unit, when the handle does not
fasten the cover or the cutter seat is not fastened, the motor
can't start, to ensure safety for the user.
• An entire apple or pear can be put in for juicing, no cutting is
needed.
• Before assembling / disassembling, check that the switch is
set to "0" as in stop.
To disassemble:
• Remove the pusher.
• Pull down the handle.
• Remove the transparent cover.
• Remove filter.
Do it reverse order to assemble.
4
All manuals and user guides at all-guides.com
• Before processing, check that filter and rotor are in position,
and that there is no contact between filter and transparent
cover. Put the transparent cover on, put the handle into the
cover slot, then turn on the machine.
• For using. Turn on power supply, press switch to let the
machine run with no load for 5 sec. Put the prepared
vegetables or fruits into the fruit chute, press it down with the
pushing bar. Juice of the vegetable or fruit will appear.
• Note: When applying force to the pushing bar, the force
should be evenly distributed. Pressing force shall not be more
than 1 kg. Sudden force may not be used or the juicing effect
will be reduced.
The power switch settings.
• O for stop
• I for normal
• II for strong
• For juicing, select strong (II).
• Process for 1min.
• Stop for 1min.
• Then repeat.
• After the above operation is performed three times, stop for
15 min.
• Using the machine this way ensures efficiency and service
life of the machine.
Cleaning
• If you use this machine often, keep the motor dry and clean.
• If you won't use the machine for a long time, please store this
machine in a dry and well-ventilated place to protect the motor
from moisture.
• Do not wash the main unit. Only clean the main unit with a
wet cloth. Other components may be washed directly with
water: Pusher, cover, filter holder, fruit pulp container.
Features
Power:
220-240V; 50/60Hz
800W effect
Warranty
The warranty period is 3 years.
Publicité
