Specifications; Maintenance Tips - Omega HHB280 Manuel De L'utilisateur

SPECIFICATIONS

Display Size/Type
Display Resolution
Monitor Controls
Probe Diameter & Type
Probe Length
Probe Field of View
Probe Depth of Field
Camera Light Source
Impact Resistance
Water, Dust, Splash Resistance Levels Camera-tipped probe:
Video Out Format/Cable Length
Battery Life
Operating Temperature/Humidity
Dimensions of Grip
Weight of Grip
Dimensions of Carrying Case
Weight of Case and Contents
Power Source

MAINTENANCE TIPS

• The camera at the tip of the probe is a sensitive, sophisticated device.
Do not use the probe as a hammer or to clear debris.
• Do not insert or bend the probe by force. Over-bending any section of the
probe to a radius of less than 2 in. (50mm) may permanently damage
delicate internal cables.
• Do not get water on the LCD.
• Do not bring the camera into contact with acid, fire or hot objects by inserting
the probe into a corrosive or extremely hot environment.
• Avoid getting oil or gas on the camera head by shutting off vehicles during
inspections.
1
2.4 in. diagonal TFT color LCD
320 x 240 pixels
180° flip, 1X to 2X zoom in 7 steps,
brightness + and –
9mm (0.35 in.) flexible-obedient
1m (39 in.)
60°
1 in. (25mm) to infinity
2 adjustable-brightness white LEDs
To height of 1m (39 in.)
Designed to meet IP67
Grip and monitor:
Designed to meet IP54
NTSC/6.6 ft. (2m)
>3 hours (typical)
32° to 113°F (0° to 45°C) @ 5 to 95% RH
10 x 3.6 x 2.3 in. (254 x 91 x 58mm)
1 lb. (454g)
15 x 11 x 3.5 in. (381 x 279 x 89mm)
4 lb. (1.8 kg)
Four "AA" batteries