Silver Eagle SE144 Instructions De Fonctionnement

Operating Instructions
SPECIFICATIONS
Free Speed. . . . . . . . . . . . . . . . . . . . . . . . 1,800 RPM
Net Weight. . . . . . . . . . . . . . . . . . . . . . . . . . . 2.5 Lbs.
Overall Length. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7"
Air Consumption . . . . . . . . . . . . . . . . . . . . . .3.5 CFM
Air Inlet Size . . . . . . . . . . . . . . . . . . . . . . . . 1/4" NPT
Average Spindle Thread . . . . . . . . . . . . . . 3/8" x 24
Minimum Hose Size . . . . . . . . . . . . . . . . . . . 3/8" I.D.
Chuck . . . . . . . . . . . . 3/8" Keyless Jacobs
Recommended Air Pressure. . . . . . . . . . . . 90 psig
Sound Level . . . . . . . . . . . . . . . . . . . . . . . . . . 88 dBA
Vibration Level . . . . . . . . . . . . . . . . . . . . .0.7 m/sec²
WARNING
RATED RPM OF THE
ACCESSORY USED
RPM RPM RPM
MUST EXCEED THE
MAXIMUM TOOL
RPM SHOWN
ALWAYS READ
INSTRUCTIONS
BEFORE USING
POWER TOOLS
ALWAYS WEAR
SAFETY GOGGLES
ALWAYS WEAR
HEARING
PROTECTION
AVOID PROLONGED
EXPOSURE TO
VIBRATION
SE144
Warning Information
® Chuck
Some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and other masonry products, and
• Arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this type of work.
To reduce your exposure to these chemicals: work in a well ventilated area, and work
with approved safety equipment, such as those dust masks that are specially designed to
filter out microscopic particles.
3/8" Reversible Air Drill
Parts Breakdown
WARNING
Copyright © Professional Tool Products, 2016
SE144
All rights reserved.
Rev 6/29/16