Using Aux In; Reset; Care And Maintenance - Furrion LIT FBS012NVP-BL Guide De Démarrage Rapide Pour L'utilisateur

Operation
buzzer.
● Press and hold button for 3 seconds to quit the SOS mode. The
speaker will return to Bluetooth mode and reconnect to the last
connected device automatically.

Using AUX IN

1. Plug one end of a 3.5mm-to-3.5mm cable (not included) into your
mobile device, just like you would a pair of headphones.
2. Lift and open the rubber cap at the end of the speaker and plug the
other end of the cable into the AUX IN port.
3. Use your mobile device to control media playback.
4. Use your mobile device or use the buttons on the speaker to pause
audio, navigate tracks and control volume.
NOTE: If more than one device is paired to the speaker with Bluetooth,
the wired device takes precedence over a Bluetooth device connection.

Reset

1. Lift and open the rubber cap at the end of the speaker.
2. Press the reset button using a sharp object.
12

Care and Maintenance

● Do not use abrasive cleaning solvents to clean the speaker.
● Do not expose the speaker to high temperatures.
● Do not attempt to disassemble the speaker, as it does not contain
serviceable components inside.
● If you do not use the speaker for long periods, be sure to store it in a
dry place, free from extreme temperature, humidity and dust.
● Only use the Furrion supplied charger when charging the speaker.
● Only charge the speaker's built-in battery in accordance with the
instructions in this user guide.
● Avoid charging the speaker in extreme high or low temperatures.