Laser Detector - Wacker Neuson VAL 300 Notice D'emploi

All manuals and user guides at all-guides.com
VAL 300
2.9

Laser Detector

Your laser transmitter is provided with a laser detector to be used with
a grade rod or handheld applications. Detectors are recommended
when it is difficult to see the laser beam, such as outdoors or in bright
light.
If you cannot pick up the beam with the detector, check how you are
lined up with the laser. One of the head protection supports on the
laser may be blocking the beam; move to the left or right to receive the
beam.
The head protection may be removed from the laser by pivoting the
two security locks. This will not affect the performance or the water or
dust resistance of the laser.
See graphic: wc_gr004586
Ref. Description
1 Level vial
2 LCD screen (front)
3 Detection window
4 Rod clamp
5 On-grade alignment notch
6 Choice of sound level
7 Choice of accuracy
wc_tx000802gb.fm
Ref. Description
8 ON / OFF
9 Turn to attach clamp to detector
10 Turn to tighten or remove clamp
from grade rod
11 9V battery compartment
(Follow polarity indications inside)
12 Bubble vial to plumb rod
13 LCD screen (rear)
EN-16
Operation