Symbols - Herth+Buss ELPARTS 95980775 Notice D'emploi

Operating Instruction
18. CATII – Measurement Category II is for
measurements performed on circuits
directly connected to low voltage instal-
lation. (Examples are measurements on
household appliances, portable tools
and similar equipments. ) Do not use the
meter for measurements within Meas-
urement Categories III and IV.

Symbols

AC (Alternating Current)
DC (Direct Current)
DC or AC
Important safety information.
Refer to the manual.
Dangerous voltage may be present.
Be cautious.
Earth ground
Fuse
Conforms to European Union directives
Double insulated
Low battery
Diode
25
Caution
To avoid possible damage to the meter or
to the equipment under test, follow these
guidelines:
1. Disconnect circuit power and discharge
all capacitors before testing resistance,
diode, continuity, capacitance or temper-
ature.
2. Use the proper terminals, function and
range for your measurements.
3. Before measuring current, check the me-
ter's fuse and turn off the power to the
circuit before connecting the meter to the
circuit.
4. Before rotating the range switch to
change functions, disconnect test leads
from the circuit under test. Remove test
leads from the meter before opening the
meter case or the battery cover.
95980775
EN