Télécharger Imprimer la page

Campbell Hausfeld TL0539 Instructions D'utilisation page 3

Publicité

Les langues disponibles

Les langues disponibles

BEFORE YOU BEGIN
Description
Air powered rivet guns are air tools designed for riveting a variety of
materials and can be used with up to 3/16 inch steel rivets (maximum mandrel
diameter of 1/8 inch).
UNPACKING
After unpacking the unit, inspect carefully for any damage that may have
occurred during transit. Check for loose, missing or damaged parts. Check
to be sure all supplied accessories are enclosed with the unit. In case of
questions, damaged or missing parts, please visit www.campbellhausfeld.com
for customer assistance.
GENERAL SAFETY INSTRUCTIONS
Safety Guidelines
This manual contains information that is very important to know and
understand. This information is provided for SAFETY and to PREVENT
EQUIPMENT PROBLEMS. To help recognize this information, observe the
following symbols.
IMPORTANT or NOTE: Information that requires special attention.
Safety Symbols
The following Safety Symbols appear throughout this manual to alert you to
important safety hazards and precautions.
Wear Eye
and Mask
Protection
Do not operate unit if damaged during shipping,
handling or use. Damage may result in bursting and
cause injury or property damage.
Danger indicates an imminently hazardous situation
which, if not avoided, WILL result in death or serious
injury.
Warning indicates a potentially hazardous situation
which, if not avoided, COULD result in death or
serious injury.
Caution indicates a potentially hazardous situation
which, if not avoided, MAY result in minor or
moderate injury.
Notice indicates important information, that if not
followed, may cause damage to equipment.
MANUAL
Read Manual
Risk of
First
Explosion
1
Risk of
Wear eye
Pressure
and hearing
protection

Publicité

loading