Xplova NOZA V Guide De Démarrage Rapide page 7

• 142mm or 148mm thru axle installation
When installing on a thru axle bicycle frame, you need to use adapters C and D
(the two accessories are included in the package). Please refer to the following
illustrations for the installation.
• 142/148 left end cap installation
Install 142/148 adapter D
rubber side) and spacer ring (adapter
E) into the axle hole on the main body.
For 142W bicycle frame, install on the axle
hole without the spacer ring.
For 148W bicycle frame, install on the axle
hole with the spacer ring.
Adapter A
Use a 5mm hex wrench to remove adapter A on the right
counterclockwise.
Adapter C
Open wrench
Use the open wrench from the toolkit to align the end of
142/148 adapter C and lock the end cap clockwise. This
completes the right end cap replacement.
Spacer ring
(black
Adapter D
EN-5
Assembly Instructions
Tools to be prepared