Hardware Installation; Minimum System Requirements; Installation - MIXVIBES U46MK2 Mode D'emploi

U46MK2 MIXVIBES

3. Hardware Installation

3.1. Minimum system requirements

Intel Pentium III 600MHz CPU or equivalent AMD CPU
256MB of RAM
Direct X 8.1 or higher
Microsoft Windows® XP or Windows® Vista, Mac OSX.
One available USB port

3.2. Installation

Before proceeding to driver installation, please locate your original Windows CD, as you may
need it during installation. If you have a motherboard with a new chipset, please install the
most recent patches provided by your motherboard or chipset manufacturers.
Locate an available USB port on your computer. A sample USB port is pictured below. It is
typically located next to the PS/2 or serial ports on the back of your computer.
Plug the U46MK2's USB cable (Series A plug type) into the USB port of your computer.
Turn on the U46MK2's power button. After that, you will see a power led switch on, on the
U46MK2's front panel. The U46MK2 gets the power from the computer via a USB cable. You
can also use an external Power supply if you have one.
Important Note
Some of your computer USB ports may not recognize the U46 mk2. In this case,
simply try to connect the device to another USB port.
8