Publicité
Les langues disponibles
Les langues disponibles
EN
STARTUP
Teaching the "Repeater" wireless
socket to recognise a wireless
transmitter
a.) Plug the "Repeater" wireless socket into a
standard 230 V AC / 50 Hz mains socket.
The LED (1) will start flashing.
b.) Before the LED (1) stops flashing, press
the "ON" button for the respective switch
channel on the wireless transmitter that
you want the "Repeater" wireless socket
to learn. The red LED (1) lights up. The
learning process has been completed
successfully.
Teaching a "Repeater" wireless
socket to recognise multiple
wireless transmitters
The "Repeater" wireless socket can learn
up to 8 wireless transmitters.
12
a.) Plug the "Repeater" wireless socket into a
standard 230 V AC / 50 Hz mains socket
and press the button (2) until the LED (1)
flashes red.
b.) Before the LED (1) stops flashing, press
the "ON" button for the respective switch
channel on the wireless transmitter that
you want the "Repeater" wireless socket
to learn. The red LED (1) lights up. The
learning process has been completed
successfully.
c.) Repeat these steps for additional
wireless transmitters.
Deleting a wireless transmitter that
the "Repeater" wireless socket has
already learnt
Channels that have been learnt can also
be deleted again.
Publicité
