Publicité
Les langues disponibles
Les langues disponibles
Installation Instructions – Junction Box Ceiling Interface (Connection at Ceiling) Aircraft Cable Mounting
INSTALLATION
Mount Details
Crossbar with
1/4-20 Stud
5'' Canopy
Strain Relief
Figure 1.
Power
Connection at Ceiling
1.
Layout mounting locations. (Figure 1.)
2.
Ensure that power feed is at the UL end of the fixture.
N
otee:
Power feed: to be installed to local/national
electrical codes by a Certified Electrician.
3.
Install 1/4-20 crossbar to the junction box.
4.
Feed power cables through canopy and install strain
relief.
5.
Connect power cable in junction box, ensuring all
connections are properly matched.
6.
Place canopy over 1/4-20 stud and attach aircraft cable.
Mounting Points Equal Fixture
Lengths 4', 8' or 12'
Power Feed
Figure 6.
Mounts Locations
Installation Instructions – Junction Box Ceiling Interface (Connection at Ceiling) Aircraft Cable Mounting AC-_-JB
4'' Octagonal J-Box
to Structure (by
Others)
1/4-20 Coupler
Aircraft Cable
First Section
ADE141260
1/4-20 Stud to
Structure (by Others)
2'' Canopy
Figure 2.
Non-Power
Figure 3.
Power (2-D)
Figure 5.
Options
Mounting Points Equal Fixture
Lengths 4', 8' or 12'
*Consecutive Section
*For Continuous Rows See Joining Sheet
www.eaton.com
AC-_-JB
Aircraft Cable
Ceiling
3/4'' Below
Ceiling
Plane
Figure 4.
Non-Power (2-D)
Curly Cord (AK):
SJT - 18/3 or
SJT - 18/4
Curly Cord
3
Publicité
