Klarstein RC90WS Mode D'emploi page 34

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

EN
34
Setting the time
Press and hold the Timer key until the LED display starts flashing.
Use the speed button to increase the number and the light button to decrease
it.
To set minutes press and hold the timer key again until the minutes start
flashing. Set the minutes.
Press and hold the timer key again to confirm your selection.
Turning on and changing the speed
Press the On/Off key to start up or shut down the hood.
Use the speed key to control the motor:
Press once: The motor runs at the lowest speed.
Press twice: The motor runs at the medium level.
Press three times: The motor runs at the highest level.
Fourth time: The motor returns to the lowest level.
Using the timer
You can set a time between 5 to 60 minutes after which the unit will automatically
turn off. Press the timer button, the display will show „05.00". Use the speed
button to increase the number and the light button to decrease it. Press the timer
key again to confirm your selection.

Publicité

Table des Matières
loading

Table des Matières