Napa 815-6243 Instructions De Montage

ASSEMBLY INSTRUCTIONS
No tools required for product assembly.
. Place metal base with casters down on a flat surface.
2. Insert the painted end of the lift cylinder into the center hole of the metal base. To avoid damaging
the cylinder, do not force or hammer cylinder into hole.
3. Place the seat on top of the unpainted end of the lift cylinder, and push down on the seat firmly.
4. To complete assembly, place your weight on the seat by sitting down. This will lock the lift cylinder
and seat into place.
Care Instructions:
Clean lift cylinder with a damp cloth. DO NOT use harsh chemicals to clean cylinder or seat.
815-6243 Parts Breakdown & Operating Manual
Ref. # Part#

2 RS8509SL Plate w/lever
2a
2a
3 RSTSAC
4
5 *
Only Ref.#'s identified by Part# are available for
purchase separately.
* Replacements available as part# BK720-272
 (pair) of casters with nyloc nuts and washers.

MODEL 815-6243
DELUXE PNEUMATIC
CREEPER SEAT
Description Qty.
Seat 

Screw (M6) 4
Air Cylinder 
Bottom Base 
Caster 5
rev. 09/29/07