Télécharger Imprimer la page

Wagan Tech Smart AC 150 USB+ Guide D'utilisation page 5

Masquer les pouces Voir aussi pour Smart AC 150 USB+:

Publicité

Les langues disponibles

Les langues disponibles

Note for Vehicle Use
This inverter has features that will prevent your battery from being
completely discharged. An automatic shutdown will initiate when the
battery voltage is 10.5 volts. If this occurs we recommend operating
your engine for 10-20 minutes to recharge the vehicle's battery.
CAUTION
• If you use a battery charger to recharge your battery, be sure to
disconnect the inverter first. Failure to disconnect the Inverter prior
to connecting a charger may result in an input voltage spike that
can damage the Inverter.
• Powering this inverter with greater than 15 volts DC can damage
the inverter and void the warranty.
• Do not use an extension cord between the DC power source and
the DC input of the Inverter. An extension cord on the DC input
can create a voltage drop that can reduce efficiency and output.
• Do not open the case of the inverter. There are no user
serviceable parts inside.
• Do not let the cord of the inverter or any appliance cord get
wet. Do not operate this Inverter in or around water. Water
can damage the Inverter. Water damage is not covered under
warranty.
Wagan Tech and wagan.com are trademarks used by Wagan Corporation.
User's Manual—Read before using this equipment
©2012 Wagan Corporation. All Rights Reserved.
4

Publicité

loading