D-Link DCS-4705E Guide D'installation page 9

Screw the back part of the waterproof connector
clockwise until there is a tight seal around the
Ethernet cable.
If you are using PoE to power your camera, use
the included rubber power connector plug to the
power connector.
If you are using a power adapter(not included)
to power your camera, wind waterproof tape
around the connection in an overlapping manner to
cover it.
Additional Information
Additional help and product information is available online at
http://www.dlink.com.
Warranty Information
Please visit http://warranty.dlink.com/ for warranty information for your region.
7 7
D-Link DCS-4705E Quick Installation Guide