Axis P3353 Guide D'installation page 11

AXIS P33 Network Camera Installation Guide
Function Pin
Digital 3
Input
Digital 4
Output
3.3 V max 50 mA
LED indicators
LED Color
Network Green
Amber
Unlit
Status Green
Amber
Red
Power Green
Amber
Notes
Connect to pin 1 to activate, or leave floating
(unconnected) to deactivate
Connected to pin 1 when activated, floating
(unconnected) when deactivated. If used with an
inductive load, e.g. a relay, a diode must be
connected in parallel with the load, for protection
against voltage transients.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to 10 Mbit/s network. Flashes for network activity.
No network connection.
Steady green for normal operation.
Steady during startup, during reset to factory default or when restoring settings.
Slow flash for failed upgrade.
Normal operation.
Flashes green/amber during firmware upgrade.
Specifications
0 to max 40 V DC
0 to max 40 V DC,
open drain, 100 mA
1
2
3
4
Page 11