Publicité
Installing the main unit bracket /
1 Remove the 2 screws from the main unit.
• Keep the screw.
2 Remove the side cover, connect the cables and attach the side cover.
Place the main unit on a cushion or soft cloth to avoid damage.
1
Side cover
Attach the main unit bracket to the main unit
Secure them with the supplied 2 screws.
• Use only the supplied screws to prevent the main unit from falling.
2
Supplied screw (3 mm in diameter x 12 mm)
Caution
Make sure the main unit is in the "Position A".
If mounted in the "Position B", it may fall from
the wall.
Maintenance
Use a soft cloth to wipe off dirt.
If the dirt is persistent, use a water dampened cloth and finish with a dry cloth.
Do not use benzine or thinner. Deformation or discoloration may result.
Specifications
Load capacity :
5 kg (11.0 lbs.) or less
Maximum dimensions : 228 mm (W) x 155 mm (H) x 162 mm (D)
(9" (W) x 6-1/8" (H) x 6-3/8" (D) )
Weight :
Approx. 1.5 kg (3.3 lbs.)
Connecting leads
Main unit bracket
Screw
Main unit bracket
(3/32" x 1/2")
Position A
YES Correct
Mounting the main unit on the wall /
Adhere the supplied paper pattern at an appropriate position and fix
temporarily with 2 screws (commercially available).
• Leave the screw heads 5 mm (1/4") above the wall to hang the wall bracket.
• Remove the pattern paper after fixing with the screws.
1
Pattern paper
1 Hang the wall bracket on the screws and tighten them.
2 Make sure all four holes are screwed.
Tighten the screws securely.
2
1
Wall bracket
Position B
NO
1 Hang the main unit bracket on the hooks of the wall bracket.
2 Secure them with the supplied 2 screws.
• The 2 screws should be tightened to prevent the main unit from falling.
• Make sure speaker leads, etc. are properly connected.
3
Wall bracket
Supplied screw (4 mm in diameter x 8 mm)
Fixing screws temporarily
Screw (commercially available)
Mounting the wall bracket
Wall bracket
2
Mounting the main unit bracket
Hook
(1/8" x 3/8")
Adhesive tape
35-45 mm
(1-3/8" - 1-3/4")
5-6 mm
5 mm
(1/4")
(1/4")
Screw
(commercially available)
Main unit bracket
Publicité
