How To Install An Sd Card (Optional); How To Access The Product - Axis Q86 Serie Mode D'emploi

AXIS Q86 Series
3. Replace the lid and tighten the four lid screws (torque 3.0 Nm).
4. Apply power to the product.

How to install an SD card (optional)

A standard or high capacity microSD card (not included) can be used to store recordings locally in
the product. See Product overview on page 16 before installing the SD card.
1. Disconnect power from the product.
2. Remove the back lid screw and remove the back lid.
3. Remove the SD card lid screws and remove the SD card lid.
4. Insert a microSD card into the SD card slot, see Product overview on page 16
5. Attach the SD card lid and tighten the screws (torque 1.0 Nm).
6. Attach the back lid and tighten the screw (torque 1.0 Nm).
7. Reconnect power to the product.

How to access the product

To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility
or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support
For more information about using the product, see the User Manual available at axis.com
28