Télécharger Imprimer la page

EMGA TECHNOiNOX QSE40/0 Notice D'emploi Et De Maintenance page 3

Salamandre ultrarapide

Publicité

Les langues disponibles

Les langues disponibles

Part 1
ULTRA RAPID SALAMANDER QSE40 - QSE60
89/336/EEC, 92/31/EEC, 93/68/EEC
The appliance must be i nstalled, connected and serviced
properly by qualified personnel according to the regulations
and directives in force in the country where it is installed, as
well as the instructions in this manual.
The Manufacturer declines all responsibility for damage caused
by improper or incorrect i nstallation or maintenance of the
appliance or by failure to observe the safety regulations!
Remove the screw that locks the movable shelf (it is on the back
of the appliance).
The appliance should be installed under an extractor fan for the
removal of cooking fumes.
The appliance can be put on a worktop or wall mounted. The
distance from adjacent applia nces and any flamma ble surfaces
must be at lea st 200 mm fr om the sides and 100 mm fr om the
rear wall.
The appliance, and es pecially the power lead, must not be
anywhere near heat source s and the s pace around the
appliance must not exceed a temperature of 50°C.
If the applianc e is installe d near walls, partitions or ki tchen
furniture, etc., these must be made of fire-proof material; if they
are not, they must be prote cted with fire-proof material which
insulates from heat.
502004-5 en fr de ma 2012-01
GB
General instructions
73/23/EEC, 93/68/EEC
INSTALLING AND CONNECTING TO THE MAINS
The bowl must always be in place when the a ppliance is
working.
Care must be taken when using the a ppliance because the
cooking surfaces are very hot.
MODEL
"M"
CABLE
CROSS-SECTION
"C"
3/12

Publicité

loading

Produits Connexes pour EMGA TECHNOiNOX QSE40/0

Ce manuel est également adapté pour:

Technoinox qse60/0Technoinox qse60/4502004502005