Homak GS00659031 Manuel Du Propriétaire Mode D'emploi page 3

ASSEMBLY
* We recommend that TWO PEOPLE work together on the assembly,
due to the weight of this workstation. Workstation weight is approxi
mately 180 lbs, please be careful during assembly.
1) Connect bottom cross pieces (Part C) to the bottom of the legs (Part E
& F). 4 bottom cross pieces use 8 long bolts, 16 washers and 8 nuts.
2) Install leg levelers (Part G).
3) Connect upper cross pieces (Part B) to the legs using 16 bolts and 16
washers.
4) Connect diagonal cross pieces (Part D) using 8
5) Attach wood top (Part I) using the 6 wood screws.
6) Connect the perforated backsplash (part H) using 6 bolts and
6 washers.
7) Attach Doors (Part J) using remaining hardware (6 bolts, 6 washers).
8) Metal grated shelf (Part K) rests on the bottom cross pieces.
Step 7
Step 5
Step 3
Step 4
Step 1
Step 6
Step 8
Step 2
- 3 -
short bolts, 8 washers.