Care And Maintenance; Disposal; Specifications - Danfoss SonoRead 868 Mode D'emploi

User Manual SonoRead 868 Wireless Radio Receiver for meter reading
9

Care and Maintenance

•
Clean the device only with a soft cloth, moistened with mild soapy water.
•
Never use strong detergents or hard brushes.
•
Disconnect the battery charger if the battery is full. The lithium ion battery does not need to be constant-
ly connected to the battery charger for keeping its charge.

10 Disposal

The SonoRead 868 must not be disposed together with the domestic waste. All users are obliged to hand
in all electrical or electronic devices, regardless of whether or not they contain toxic substances, to ensure a
disposal in environmentally acceptable manner.
Therefore, return the device at the end of its lifetime to the manufacturer (address on page 36).

11 Specifications

Name:
Application:
Place of operation:
Protection rating:
Receiver frequency:
Receiving range:
Receiver memory:
Power supply:
Autonomy:
Battery life time
expectancy:
Battery Charger:
Operating conditions:
Storage conditions:
Dimensions:
Weight:
Interface:
VUIGP102
SonoRead 868
Radio receiver with Bluetooth interface
Non-weather protected portable applications
IP64
868 MHz
depending on environment up to 400 m (outdoor) or up to 30 m (indoor)
2000 radio telegrams
3.7 volt lithium ion rechargeable battery
20 hours (without using the serial interface)
> 300 charging cycles
Input: 100 V to 240 V AC
50 to 60 Hz
1.0 A max.
Output: 5 V DC
3.0 A max.
The charging device may only be used in dry and weather-protected
environments.
-5°C to +55°C (not during battery charging)
0°C to +45°C (during battery charging)
10% to 95% humidity
-20°C to +45°C (less than 3 months)
-20°C to +25°C (less than 1 year)
for keeping at least 80% of the battery capacity
approximately 160 x 180 x 40 mm (without antenna)
length of antenna approximately 180 mm
300 g
Bluetooth 2.1 Class 2 (10 m)
© Danfoss | Energy Meters | 2017.09 13