HEBU Dust extractor Set
4 Installation
4.1 Installation Dust Removal Unit
➢ Pos.1 to clip on with Pos.3 and to tighten with Pos. 2.
➢ Pos. 5 (o- ring) to put over Pos. 4 and to grease bajonett fitting.
➢ Pos. 1 to connect the bajonett fitting over Pos. 4.
1
4.2 Automatic mode
➢ To draft the saw blade and manual the screw to edge upwards.
➢ To apply open- ended wrench on shaft to secure.
➢ To tighten the screw with socket wrench.
socket wrench
open- ended wrench
15
4
5
2
3
EN