Operating And Display Elements - Rittal Rnis Cmc Iii Notice D'installation Et Notice D'utilisation Succincte

4 Assembly
4.1 Assembly instructions
The ISDN unit is assembled as shown in fig. 2.
5 Installation and operation
5.1

Operating and display elements

The operating and display elements are shown in fig. 3.
Key to fig. 3
1 Multi-LED for status display
2 Connection of the CMC III Processing Unit RJ 12/RS 232, 24 V
item 4)
3 RJ 45 ISDN jack
4 Connection of the CMC III Processing Unit RJ 12/RS 232, 24 V
item 2)
5.2 Settings
The following settings must be made via the CMC III PU website before connecting the ISDN unit.
In the browser, enter the IP address of the CMC III PU in the network. The login dialog for logging
in to the device will be displayed.
Log in with the username admin and the password admin.
In the left-hand section of the overview window (navigation section), click on the Processing
Unit entry and in the right-hand section (configuration section), click on the Configuration tab.
In the group box Network, click on the SMS button.
In the SMS Configuration window, in the group box Service Parameters, enter the MSN
number of the ISDN connection in the ISDN MSN field. The number must be entered in the fol-
lowing format: +49/2772/123456.
If you have connected the ISDN unit to a telephone system, please also enter the dialout number
in the ISDN Pre-Dial Number field (in the same group box).
A text message must be sent once to register with the network operator. In the same group box,
enter the required information in the ISDN Command field. For example, Deutsche Telekom D1:
"8888 ANMELD".
Click on the Save button to change your settings.
5.3 Installation
Connect the ISDN unit to the building's ISDN connection using an RJ 45 connection cable (fig. 3,
item 3).
Connect the ISDN unit to the CMC III PU using an RJ 12 connection cable (fig. 3, item 2 or
item 4).
Status change display on the multi-LED of the ISDN unit:
– Continuous blue light: A connection is being made.
– Continuous green light: The ISDN unit is ready to transmit.
– Continuous orange light: A text message is being transmitted.
– Continuous red light: Initialisation error.
Rittal CMC III ISDN unit
Assembly, Installation and operation
, 500 mA (alternative to
, 500 mA (alternative to
EN
7