Starting Up And Operation Of Capturs Model B - Capturs MODEL B Guide D'utilisation

Starting up and operation of Capturs
Model B
● Completely charge the Model B Capturs before use.
Plug the Type A Micro-USB cable provided into your computer and
○
the Micro-USB plug of your tracker.
○ The charger LED will turn on in red.
○ When the tracker is charged, indicated by the charger LED turning
green, you must unplug it.
● Starting the tracker: A simple press of the Capturs Model B central
button turns it on, if there is sufficient battery power, and starts sending
real-time positions.
● Operating
https://connect.capturs-systems.com
application
account and go "My Devices" to integrate your Capturs Model B. Use the
serial number (S/N) and the activation key (Key) written on the sticker
on the device to add your tracker on your account. Follow the
instructions on the FAQ to use the trackers, parameter alerts, download
reports on the online interface.
● Stopping the tracker: Press the central button until the blue and red
LEDs light up (about 5 seconds). Then release the button.
Important : GPS is a sensitive technology. Indoor GPS cannot work. When it
has not been used outside for more than 4 hours, the first acquisition will take
longer. You should do it without moving because when moving it will take even
longer. Before going out, you should stay still outside for 5 minutes.
CAPTURS SAS - 819 072 570 R.C.S. Toulouse 425 Rue Jean Rostand 31670 Labège +33 6 73 18 19 36 –
the tracker:
on https://capturs.com/en/application-en/.
go to the
or download
contact@capturs.com
Connect platform
the mobile
Create
– © CAPTURS 2021
10
an