Unit Description - BoomToneDJ Quattro Scan LED Mode D'emploi

2- Unit Description

4-
BUTTON:
1 MENU
2 UP
3 DOWN
4 ENTER
LED:
5 DMX
6 SLAVE
7 MASTER
8 SOUND
5 Detected in console mode, if the program has a control signal, the indicator light
flashing
6 In Slave mode, if the program has detected signals from the machine, the indicator
lights flashing
7 In Master mode, the indicator light will be turn on
8 In Sound mode, if detected SOUND signals, the indicator light will be flashing
9 DMX input: For DMX512 link, use 3/5-pin XLR plug cable to input DMX signal.
10 DMX output：For DMX512 link, use 3/5-pin XLR plug cable to link the next unit.
11 Mains input：Connect to supply mains power.
12 Microphone：Receive music for the sound active.
Forward over the menu /Return to a layer of the menu
Increase parameters
Reduce parameters
Into the next layer menu
On
On
On
Flashing
11
DMX input present
Slave Mode
Master Mode
Sound activation