Lighting - Hanseatic SY-103E11 600 Manuel D'instructions Utilisateur

Care and maintenance
If one of the lamps no longer functions, it may no longer be used. The bulb must
Lightning
be replaced.
The appliance operates using a hazardous voltage. Before replacing
Electrical shock hazard!
the bulb, disconnect the mains plug. Do not touch any live
components inside the socket.
Before opening the cover and removing the bulb, allow the bulb to
Risk of burns!
cool down.
Do not touch the new bulb with your fingers, because this will reduce
Important!
the service life. Use a dry cloth.
LED lamps have a very long service life (up to 50,000 hours). They are not
affected by impacts and vibrations.
However, if an LED lamp should stop working, please consult our hotline (see
"Our service"). The replacement must be carried out by a trained electrician only.
The replacement of LED lamps should be conducted by a trained electrician.
Replacement of LED lamps
General
17
English