Universal Electronics ATLAS OCAP Guide D'utilisation page 21

Atlas OCAP M1056.fm Page 21 Tuesday, March 24, 2009 4:45 PM
3. Press AUD once, then press VCR once. The VCR
key will blink twice.
The VCR key is now ready to be programmed for your
second audio device. See "Programming Device
Control" on page 10. To re-assign other device keys,
repeat these and substitute the key sequence using the
following chart:
NOTE: Only one device can be assigned to an unused
device key at a time.
To Re-Assign Perform Key Sequence
VCRÆSETUPÆ9Æ9Æ2ÆAUDÆVCR
VCR as 2nd
AUD key
VCRÆSETUPÆ9Æ9Æ2ÆTVÆVCR
VCR as 2nd
TV key
VCR as 2nd VCRÆSETUPÆ9Æ9Æ2ÆCBLÆVCR
CBL key
VCR back to VCRÆSETUPÆ9Æ9Æ2ÆVCRÆVCR
VCR
To re-assign another unused device key, substitute it for
the VCR key above and then perform the sequence. For
example, to re-assign an unused AUD key as a second
DVD key, perform
AUDÆSETUPÆ9Æ9Æ2ÆDVDÆAUD.
When a re-assignment is done, the selected device key
(e.g., AUD) will blink twice to confirm your choice. At
that time, you will need to program device control (see
"Programming Device Control" on page 10).
www.urcsupport.com/atlasocap
21