In Case Of Difficulty - Honeywell Home EConnect TL9160AR Manuel D'utilisation

In case of difficulty / Error codes
Heating system does not respond
"Signal Lost" appears on the screen • The thermostat has lost communication with the
The thermostat displays "LO"
The thermostat displays "HI"
The thermostat displays "- -"
ELECTRICAL HAZARD
The servicing or rewiring of any equipment interface module (EIM) linked
to this thermostat must be done by a certified electrician.
• Check circuit breaker and reset if necessary
wireless network (usually due to power outage).
Otherwise, check circuit breaker and reset if
necessary. When power is restored, the wireless
communication will be restored within a few
minutes.
• The indoor temperature is below 32°F (0°C).
• The indoor temperature is above 140°F (60°C).
• The temperature reading is currently unavailable or
the sensor is defective.
21
EConnect™ TL9160AR
69-2475EFS—05