Philips AJ3136 Mode D'emploi page 6

USING THE ALARM
General (see 2)
If you wish to use the alarm, first set the alarm time before selecting your choice
of alarm mode. By rotating the set in 4 different position, you can choose Radio
(FM) / Buzzer / Submarine
As you rotate the set, AJ3136 interacts in the following way. You will :
™ hear a special whirring sound effect
™ see the backlight blink briefly.
The hour and minute display will also adjust to match the new rotated position.
TIP :
• If you wish to deactivate or activate the whirring sound, press and hold on the
HOUR + and RADIO ON / OFF buttons simultaneously.
• When the batteries on AJ3136 are low, the battery low icon
blacklight and sound effects are possible.
Setting the alarm
1. Press ALARM ON / OFF once to switch on the alarm.
™
lights up.
2. Rotate the set with the symbol of the alarm mode, which you wish to be woke
up, facing on the top.
When reach alarm setting time, Radio, Buzzer, Submarine or Frog will switch on
for about 30 minutes and the alarm indicator flashes.
• For Buzzer option only, your gentle wake alarm increases its beep tone frequency
within seconds.
Switching off the alarm
24HR ALARM RESET
If you want the alarm mode to be stopped immediately but also wish to retain the
same alarm setting for the following day:
• Press ALARM RESET / SLEEP.
™ You will hear a sound "Ding Dong" confirming 24 hour reset activation.
/ Frog to wake you up.
blinks. No
REPEAT ALARM
This will repeat your alarm call at 5 minute intervals.
• During the alarm call, press REPEAT ALARM•BRIGHTNESS CONTROL
™ The alarm indicator flashes during repeat alarm.
• Repeat if desired.
CANCELING THE ALARM COMPLETELY
• During alarm activated or repeat alarm mode, press ALARM ON / OFF once.
Alarm will be switched off completely.
™ The alarm indicator disappears.
SLEEP
About Sleep
This set has a built-in sleep timer, which enables the radio to be automatically
switched off after a set period of time. There are four sleep time options.
Setting and switching off sleep
1 Press ALARM RESET / SLEEP to switch on the radio
2 Within 1 second, press ALARM RESET / SLEEP again once or more to select your
sleep time.
• The sleep time options:
SL : 30, SL : 20, SL : 10 and OFF.
™ The Sleep indicator
lights up.
3 To cancel sleep, press either:
– ALARM RESET / SLEEP once or more until
– REPEAT ALARM•BRIGHTNESS CONTROL
disappears from the display.