Before First Use - Flash-e-Vapor BF-1 Notice D'utilisation

EN

BEFORE FIRST USE:

The Flash-e-Vapor BF1 is a atomizer based on the principle of "Bottom-Feeding".
This means the liquid will not be feeded automatically from a tank to the coil as usual,
but has to be squeezed manually from a "Squonker-Bottle" (inside a
specialized Mod = "Squonker Mod") into the atomizer repetitively in between each
several puffs.
Therefore, please use the Flash-e-Vapor BF1 exclusively in addition with a Squonker-Mod!
10
Please observe the following steps, before the first use of your Flash-e-Vapor BF1:
- Install a suitable heating coil (heating wire) between 1.0 and 2.5 ohm to the poles of the
„Bottom-Feeder-Base".
- Insert a coil-wick into the heating coil (Cotton wool)
- Ensure both ends of the coil-wick are touching the ground of the Bottom-Feeder-Base,
to allow liquid-delivery into the heating coil.
- Moisten the coil-wick well with your e-liquid
1. General Information
- Sale, transfer to or use of eCigarettes by minors under the age of 18 years is prohibited.
- For technical specifications and proper handling of your Flash-e-Vapor, see the device's
manual.
2. Instructions for use and storage
- Keep eCigarettes and eLiquids out of the reach of children and pets.
- Only use compatible refills, connectors or spare parts.
11