Remove The Battery Pack; Operation; Start The Machine; Stop The Machine - GreenWorks WLG302 Manuel D'opérateur

1. Align the lift ribs on the battery pack with the
grooves in the battery compartment.
2. Push the battery pack into the battery compartment
until the battery pack locks into place.
3. When you hear a click, the battery pack is installed.
6.3

REMOVE THE BATTERY PACK

Figure 3.
1. Push and hold the battery release button.
2. Remove the battery pack from the machine.
7

OPERATION

WARNING
Do not use any attachments or accessories not
recommended by the manufacturer of this product.
7.1

START THE MACHINE

Figure 4.
1. Push the on/off button.
7.2

STOP THE MACHINE

Figure 4.
1. Release the on/off buttton.
7.3

ADJUST THE ANGLE

Figure 5.
1. Turn the top head of the mahicne to adjust the light
angle (0-135°).
8

MAINTENANCE

WARNING
Remove the battery pack from the machine before
maintenance.
WARNING
Do not use strong solvents or detergents on the plastic
housing or components.
8.1

CLEAN THE MACHINE

CAUTION
The machine must be dry. Humidity can cause risks of
electrical shocks.
• Clear the unwanted material out of the air vent with
a vacuum cleaner.
• Do not spray the air vent or put the air vent in
solvents.
English
• Clean the housing and the plastic components with
a moist and soft cloth.
9

TECHNICAL DATA

Rated Voltage
Lumens
Run time
Rotary angle
Weight without battery
Battery model
Charger model
10

LIMITED WARRANTY

YEAR/ANS/AÑOS
TOOL WARRANTY
GARANTIE DE
L'OUTIL
HERRAMIENTA
®
Greenworks hereby warranties this product, to the
original purchaser with proof of purchase, for a period of
four (4) years against defects in materials, parts or
workmanship. Greenworks
repair or replace any and all parts found to be defective,
through normal use, free of charge to the customer.
This warranty is valid only for units which have been
used for personal use that have not been hired or
rented for industrial/commercial use, and that have
been maintained in accordance with the instructions in
the owners' manual supplied with the product from new.
ITEMS NOT COVERED BY WARRANTY:
1. Any part that has become inoperative due to
misuse, commercial use, abuse, neglect, accident,
improper maintenance, or alteration; or
2. The unit, if it has not been operated and/or
maintained in accordance with the owner's manual;
or
3. Normal wear, except as noted below;
4. Routine maintenance items such as lubricants,
blade sharpening;
5. Normal deterioration of the exterior finish due to use
or exposure.
HELPLINE:
Warranty service is available by calling our toll-free
helpline, at 1-833-493-5483.
7
24 V
220 lm
20 hours
135°
0.60 lbs (0.27 kg)
BAM706
CAM803
®
, at its own discretion will
EN