Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operating panel
Set mode: Press the Set button for 3 seconds to run through the program: Time > Feeding > Feeding
times. Flashing values can be changed and/or saved. When the time set at the beginning is displayed
again and no longer flashes, all settings are saved and the unit is ready for operation (operating mode).
Operating mode: Press the Set button briefly to dispense food outside the set times.
F Description
1
Display
(numerical dis‐
play)
2
Set button
3
Socket
Function
Time display
Display of feeds
Left‐hand number in the
display
Right‐hand number in the
display
Display of feeding times
1st feed
2nd to 4th feed
Command button
Change settings
Command: Save the value
flashing in the display and
advance through the op‐
tions on the display.
Command: Immediately dis‐
pense food (extra feed).
For connecting a 6 V DC power supply unit. Not included. Not available
in North America, battery operated only
Value
00:00 ... 12:00 h AM/PM (standard) or
00:00 ... 24:00 h (changed)
1 ... 4, number of programmed feeds
0 ... 3, number of programmed rations ("0"
stands for no ration)
00:00 ... 12:00 h AM/PM or
00:00 ... 24:00 h
Accordingly
Keep the button pressed for 3 s.
Press the button briefly in Set mode.
Press the button briefly in operating mode.
‐ EN ‐
11
Publicité
Table des Matières
