Epson WF-2630 Mode D'emploi

WF-2630
Start Here
1
Unpack
Note: Do not open ink cartridge packages until you are ready to install the ink. Cartridges are vacuum packed to maintain reliability.
2
Turn on and configure
Caution: Do not connect to your computer yet.
3
Install ink cartridges
4
Load paper
Read these instructions before using your product.
Note for Spanish speakers/Nota para hispanohablantes: Para obtener
instrucciones de configuración en español, consulte la Guía de instalación
en epson.com/support/wf2630sp (requiere una conexión a Internet).
French control
panel stickers
Select your language, country, date, and time.
Note: You can change these settings later using the product's
control panel. For more information, see the online User's Guide.
Remove only the yellow tape from
each cartridge.
Caution: Don't remove any other seals or
the cartridges may leak.
Note:
The printer is designed for use with Epson
•
third-party cartridges or ink.
The cartridges included with the printer are designed for printer
•
setup and not for resale. After some ink is used for priming, the rest
is available for printing.
Caution: Don't turn off the printer while it is priming or you'll waste ink.
Caution:
arrow mark inside the edge guide.
Select the paper settings on
the product's control panel.
cartridges only, not
®
Do not load paper above the