Adjusting Display Brightness - CAME BPT TH/600 Manuel D'installation Et D'utilisation

A
B
C
D
E
Setting the unit of measurement for the temperature
Choose the unit of measurement for the temperature
arrows A.
using the
Press the button to move on to the next parameter
to be configured.
Screen backlighting
arrows B, choose whether the back-
Using the
lighting should always be on (ON) or only when the
display is touched.
Press the button to move on to the next parameter
to be configured.

Adjusting display brightness

Change the screen brightness using the
OO= Backlighting always off.
Press the button to move on to the next parameter
to be configured.
Buttons beep
Choose whether to activate/deactivate the buttons beep
arrows D.
using the
Press the button to move on to the next parameter
to be configured.
Hours of activity counter
The screen in figure E shows the device's hours of
activity.
To reset the counter to zero, press it for a long time in the
area highlighted in the figure.
Press the button to move on to the next parameter
to be configured.
arrows C.