Charging; Cleaning And Maintenance - Herth+Buss ELPARTS LED Shine Exchange Notice D'emploi

Operating Instruction
INFORMATION

Charging:

Charge the rechargeable battery
handle (base unit A) fully before first
use. Likewise, when storing over
an extended period of time, charge
beforehand and charge at least 1x
per year during storage in order to
prevent the rechargeable battery pack
deep-discharging.
To do so, pull the sealing cap out of
the charge socket on the rear of the
housing and plug in the charge plug.
Then plug the mains adapter into the
mains outlet.
Charge only when switched off. Do
not charge and use the light at the
same time!
INFORMATION
LED rechargeable battery indicator
on the rear of the housing (base
unit A) via status LEDs:
Charge status:
The illuminated indicator LEDs show the
charge status. The charging process is indi-
cated by an LED flashing.
17
Remaining capacity indication:
The number of illuminated indicator LEDs
indicates the remaining battery capacity.
Holding devices (hooks, magnets):
If the light is to be fastened with the integra-
ted holding device, ensure that the holding
device is firmly/properly fastened in place.
Cleaning/Maintenance:
Carry out cleaning tasks only when the
mains plug is removed from the mains
power!
Clean only with a slightly damp cloth,
then rub it dry.
Never submerge the product in water or
other liquids.
Do not allow fluids to enter the housing.
Do not use hard brushes or sharp objects
for cleaning.
CAUTION
Improper usage of the lamp may
result in it being damaged:
Do not throw or drop
Use only in original condition
Do not use while still in packaging
Turn off after use
99910164
EN