Gigaset T300 PRO Guide D'installation Rapide page 7

§§4§§
Start the Gigaset T300 PRO using the start button (on the front of the device).
Note:
The start-up process takes two to three minutes after which the device is operational.
Establishing the network (IP) address
Option 1: Using a USB stick
Insert a USB stick into the USB port on the front of the Gigaset T300 PRO. The IP address
is now automatically recorded in a text file on the stick and this is confirmed by an audible
signal. Now remove the USB stick and connect it to a desktop computer. Open the file on
the USB memory using any text editor. The current IP address of the Gigaset T300 PRO will
be displayed to you.
Option 2: Using a monitor
Connect a monitor to the Gigaset T300 PRO. The IP address is displayed on the start page
as soon as the system is operational.
Launching the
Gigaset T300 PRO is now operational and has to be adjusted to the local infrastructure in
an initial configuration. The configuration can be performed using an Internet browser on
any desktop computer in your network. The network address (IP address) is required to
access the Gigaset T300 PRO. Enter the IP address in the browser's address field to start
the configuration.
Authorisation
We, Gigaset Communications GmbH, declare that this device meets the essential require-
ments and other relevant regulations laid down in Directives 2004/108/EC and 2006/95/
EC.
A copy of the 004/108/EC und 2006/95/EC Declaration of Conformity is available at this
Internet address: www.gigaset.com/docs
1 2
Gigaset T300 PRO
3
administration
Legend for connections:
1 USB
2 Display/HD Activity
3 Operation display/appliance
7