Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FILE-NAME: SHADA Main Brands - 2019012501 - Two different sizes for Packing artwork - Workfi le with fonts.indd
Printfi le created on: 20191018 11:49 - Design: WAPC
LED's work
05 Security related information
When using the product, make sure the unit is sufficiently ventilated, never cover the unit
during operation and keep it out of reach of children or animals. This product is not a toy,
LED lights are extremely bright and looking directly at the light source during operation
can lead to serious eye damage. Any other use of the device than described in the manual
may damage the product or cause danger to the user, e.g. due to a short circuit, fire or
electric shock. The safety instructions must be observed at all times.
06 Conformity of the product with legislation
The warranty expires in the event of damage due to non-compliance with the safety
instructions of the device. Furthermore, we are not liable for consequential damage,
damage to objects or persons resulting from failure to observe the safety instructions and
improper use/handling of the device due to wear and tear. Product design and specifica-
tions are
subject to change without notice. All logos and trade names are registered trademarks of
their respective owners and are hereby acknowledged as such.
07 Storage of the Manual
Please read the operating instructions carefully and completely before use. The operating
instructions are part of the product, they contain important information on the
commissioning and handling of the device. Keep all enclosed operating instructions for
future reference. If the device is sold or passed on to third parties, you are obliged to pass
on the operating instructions as these are lawfully part of the product.
08 Use of the product / Installation
Before use, check the completeness of the parts supplied and the intactness of the prod-
uct. If damaged, it must not be put into operation.
At first usage:
1. Open the battery compartiment on the backside of the product.
2. Place the batteries (see table 1 for the correct type of battery, batteries not included).
3. Close the battery compartiment.
4. The on/off switch can be found at the bottom of the LED module.
Select the correct mode:
Press = (on) 100%
2
Press = 20%
nd
3rd press = off
Press shortly 2x = strobe
Press and hold to dim.
Zoom:
Turn the top of the torch to the right to zoom in.
Turn the top of the torch to the left to zoom out.
09 Operating the product
The safety instructions and warnings must be observed to ensure both the perfect condi-
tion of the product and safe operation.
10 Product maintenance
Nightwatch 400 can be cleaned with clear water and a soft cloth. Do not use detergents
containing surface active agents or scouring agents.
5
0344-MAN-XX-2019101800-ZGO-599-60.indd 5
18/10/2019 11:49:0
Publicité
Table des Matières
