Instructions For Use - Zafferano Sister Light Mode D'emploi

Quickly press the touch sensor to switch on the lamp
0 - 1 sec
OFF
6%
CALL TO THE TABLE (IF ON - step 4 of the configurazion menu)
2 sec
When the lamp is switched on, press lightly for 2 seconds
to activate the call to table function
(IF DIMMER AND CALL TO THE TABLE FUNCTIONS ARE OFF - step 3 and 4 of the configurazion menu)
Quickly press the touch sensor to switch on the lamp
PERMANENT RED LED
the battery charge is lower than 20%,
charging is recommended.
When the charge is depleted (1%), the
lamp does not switch on but emits three
white flashes as an alert to charge
6

INSTRUCTIONS FOR USE

MANUFACTURER'S CONFIGURATION
SWITCHING ON / OFF
0 - 1 sec
DIMMER FUNCTION
100%
60%
When the lamp is switched on, quickly press the touch sensor to change
the luminosity of the appliance. Cyclical step repetition.
30%
OTHER CONFIGURATIONS
ON
SWITCHING ON / OFF
0 - 1 sec
For more information and updates visit our website
NOT PRODUCED IN ITALY - IMPORTED BY
Zafferano srl, Viale dell'Industria, 26 - 31055 Quinto di Treviso - TV - Italy
www.zafferanoitalia.com
1
Press lightly for 3 seconds to switch off the lamp
Quickly press the touch sensor to deactivate the call to
1 table
1
Quickly press the touch sensor to switch off the lamp
INDICATOR LEDS
FLASHING RED LED
charging in progress
3 sec
0 - 1 sec
0 - 1 sec
PERMANENT BLUE LED
the battery is 100% charged,
disconnection from the power charger
is recommended
2
OFF
2
2